25
DAILY CLOSING PROCEDURES
NOTE:
YOUR HANDS SHOULD BE CLEANED
AND SANITIZED BEFORE YOU PERFORM
THE FOLLOWING PROCEDURES.
NOTE:
USE THE BRUSHES IN THE
MAINTENANCE KIT FOR THE FOLLOWING
PROCEDURES.
NOTE:
USE ONLY
MCD ALL PURPOSE
SUPER CONCENTRATE (APSC) (HCS)
AND
MCD SANITIZER (HCS)
FOR THE
FOLLOWING PROCEDURES.
NOTE:
INSPECT ALL WEAR ITEMS AND
REPLACE IF NECESSARY.
Uninstalling the Injector System
Follow these instructions to remove the Injector
System from the freezer during closing.
1. With a container under the dispensing
spout, press the ROTOR FLUSH key on the
Keypad to purge any remaining product
from the Injector Head. (See Figure 26.)
26250
Figure 26
2. Rotate the 9-Tube Assembly coupler
counter-clockwise and then slide it from the
syrup line opening. (See Figure 27.)
26050
Figure 27
3. Hang the 9-Tube Assembly on the
Accessory Hanging Bracket. (See
Figure 28.)
26184
Figure 28
4. Rotate the Injector Head locking collar until
it unlocks from the Injector Adapter locking
tabs and remove the Injector Head from the
Adapter. (See Figure 29.)
26051
Figure 29
5. Lift the Mounting Bracket with the Injector
Assembly from the freezer door knob. (See
Figure 30.)
26052
Figure 30
Summary of Contents for FB 80M Series
