Flavor Burst FB 80M Series, Manual

Page: 33 / 84

31
12. Attach the Syrup Bag Adapter to the bag
fitment. The notch of the black collar must
settle into one of the grooves on the fitment
in order to secure the connection. (See
Figure 54.)
NOTCH MUST
SETTLE INTO
GROOVE
26077
Figure 54
13. Turn the adapter valve toward the syrup line
while holding the adapter base. Syrup lines
may be installed in any position as long as
the syrup tubes are not pinched. (See
Figure 55.)
26277
Figure 55
14. Connect the Syrup Bag Connector to the
Syrup Bag Adapter. (See Figure 56.)
26275
Figure 56
15. Select the number of the corresponding
syrup flavor.
16. Place a container under the Injector Head to
catch residual sanitizer solution and/or fresh
product to be dispensed and press PUMP
FLUSH to prime the syrup line. (See
Figure 57.)
26251
Figure 57
17. Once syrup flows consistently from the
Injector Head, press OFF to complete the
procedure.
NOTE: THE PUMP FLUSH FUNCTION WILL
AUTOMATICALLY SHUT OFF AFTER 15
MINUTES.
NOTE: YOU MAY WANT TO PROCEED WITH
STEP 18 AS TIME ALLOWS DURING THE
PUMP FLUSH FUNCTION IF AN ADDITIONAL
FLAVOR NEEDS TO BE INSTALLED.
18. Repeat this entire process for each
additional flavor to be installed.
19. When no additional flavors need to be
installed, press the ROTOR FLUSH key to
clean the Injector Head. (See Figure 58.)
26250
Figure 58