Flavor Burst FB 80-08, Manual

Page: 55 / 74

54
3. Clean, rinse and dry thoroughly the area on
which the Bracket will be mounted using
detergent water, clean water, and single
service towels. (See Figure 144.)
Figure 144
4. Remove the protective adhesive tape from
the adhesive strip on the Bracket. (See
Figure 145.)
Figure 145
5. Mount the Bracket to the desired area on
the freezer. (See Figure 146.)
Figure 146
6. The 9-Tube Assembly slides into the
smaller slot on the Bracket so that the
coupler casing is above the bracket and the
syrup tubes hang below. (See Figure 147.)
Figure 147
7. The Drive Motor hangs upside down in the
larger slot, so that the heads of the
mounting screws slide above the Bracket,
and the rest of the Motor hangs below it.
(See Figure 148.)
Figure 148