Flavor Burst FB 80-08, Manual

Page: 59 / 74

58
14. Place a container under the Injector Head to
catch sanitizer solution and/or fresh product
to be dispensed and press PUMP FLUSH to
prime the syrup line. (See Figure 164.)
Figure 164
15. Once syrup flows consistently from the
Injector Head, press OFF.
NOTE: THE PUMP FLUSH FUNCTION WILL
AUTOMATICALLY SHUT OFF AFTER 5
MINUTES.
NOTE: YOU MAY WANT TO PROCEED WITH
STEP 16 AS TIME ALLOWS DURING THE
PUMP FLUSH FUNCTION IF AN ADDITIONAL
FLAVOR NEEDS TO BE INSTALLED.
16. Repeat Steps 3-15 for each additional flavor
until all flavors have been installed and
primed.
17. After all flavors have been installed and
lines primed, press the ROTOR FLUSH key
to clean the Injector Head. (See
Figure 165.)
Figure 165