Flavor Burst CTP 80SNS-L, Equipment, Maintenance And Operations Manual

Page: 71 / 75

70
This section is a quick reference on how to
draw a serving. If this is your first time
operating the Color Touch Panel after
installation, it is important you
FIRST
go
through the Equipment Setup Wizard, Priming
Functions, and System Calibration sections
outlined in the previous section of this manual.
Once the panel is set up, test the system and
the panel settings.
Follow these instructions to draw a serving.
1. Place cup firmly in the cup holder. Allow the
cup to rest freely.
NOTE: DO NOT HOLD OR DISTURB THE
CUP WHILE THE SYSTEM IS DISPENSING.
2. Select the size of the serving at the top of
the screen. By default, the serving size is
set to LARGE.
3. Depending on what you want to dispense,
do one of the following:
Dispense Both Ice Cream and Syrup:
Simply select the syrup flavor. The system
will automatically start dispensing both ice
cream and syrup. The selected flavor will
show on the left side as the cup image on
the screen “fills up.” The system will
automatically stop dispensing when the
serving is complete.
Dispense Ice Cream Only: Select the
TOUCH TO DISPENSE ICE CREAM ONLY
button under the menu buttons. The system
will automatically start dispensing ice cream
and stop when the serving is complete.
DRAWING A SERVING