Flavor Burst CTP 80SNS-L, Equipment, Maintenance And Operations Manual

Page: 24 / 75

23
Electronic Parts and Connections (See Figure 6)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1
ELE 906SNS
FLAVOR 10 COLOR TOUCH PANEL
- SNS
1 Control system for the unit.
2
MIS 3528
3.5 MM MALE
-
MALE CABLE 26"
SNS
1
Electronically connects Touch Panel to
freezer.
3 ELE 427SNS MICRO SWITCH CABLE - SNS 1
Electronically connects the micro switch of
the lid to the Touch Panel.
4
ELE 462
V7
-
3S17D8
-
022 MICRO SWITCH
SNS
1
Signals the Touch Panel whether or not the
lid is in place.
5
MIS 3503A
ST MODEL LINEAR ACTUATOR
ASSEMBLY - SNS
1 Lifts the freezer draw pin when activated.
6
CAB 137-A ELECTRONICS COVER 1
Protects and covers electronics
microprocessor.
7
FAS 2014 8-32 X 1/2" PAN HEAD 16 Secures various parts within the top of unit.
8 MIS 3150 FLAVOR BURST LOGO DECALS 1 Displays Flavor Burst trademark logo.
9 CAB 156 CONNECTOR SHIELD 1 Protects power cables from liquids.
10
ELE 485CTP 120V POWER ENTRANCE MODULE 1
Provides a power connection to the outside
of the cabinet.
11
ELE 932
PUMP & SANITIZER CABLE
HARNESS
1 Provides power to syrup & sanitizer pumps.
12
ELE 933SNS
POWER SUPPLY JUMPER CABLE -
SNS
1
Connects the power supply to the electronics
board and SNS controller board.
13 CAB 138-SNS ELECTRONICS BASE PANEL - SNS 1 Secures electronics board.
14
MIS 3507
SNS CONTROLLER
-
LOAD CELL /
LINEAR ACTUATOR
1
Provides power to the load cell (weight
sensor) and linear actuator (auto draw lift).
15
ELE 911 ELECTRONICS BOARD 1 Provides power to the system.
16
FAS 2024 8-32 X 1/4 PAN HEAD SCREW 4 Secures power supply to the base panel.
17
FAS 2035 8-32 NUTS - EXT. LOCK WASHER 4
Secures ground wire to screw and
Panel and the Electronics Box to the panel.
18
FAS 2139 M4 x 6 PHILLIPS PH S.S. SCREW 4
Secures the SNS controller board to the
base panel.
19
ELE 930 SNS
INTERNAL SNS LIFT MOTOR
CABLE
1
Connects the lift motor to the SNS controller
board.
20
ELE 926SNS
INTERNAL WEIGHT SENSOR
CABLE
1
Connects the weight sensor to the SNS
controller board.
21
MIS 3216 CLOSURE PLUG 5/8 INCH 1 Closes up extra opening in the base panel.
22
ELE 434 POWER CABLE 1 Supplies the electronics board with power.
23
ELE 927 RJ45 ETHERNET CABLE GLAND 3 Secures the Ethernet cable to the cabinet.
24
ELE 925-10
RJ45 EHTERNET CABLE -
EXTERNAL
2 Connects the Touch Panel to the cabinet.
25 ELE 926
RJ45 ETHERNET CABLE -
INTERNAL
2
Connects the Ethernet cable to the
electronics board.
26
MIS 3504A
QL
-
55 LOAD CELL 20KG CAPACITY
ASSEMBLY
1
Measures the weight of object connected to
the cup holder.
27
ELE 931SNS
EXTERNAL SNS LIFT MOTOR
CABLE
1
Connects the auto draw lift motor to the
cabinet electronics.