Flavor Burst CTP 80SNS-L, Equipment, Maintenance And Operations Manual

Page: 40 / 75

39
17. Once all the lines have flushed, disconnect
all the flush adapters.
18. Connect the cleaned syrup lines to each
bag of syrup as instructed on each screen.
If any of the bags are empty, you can
replace them with full ones of the SAME
flavor at this time.
19. Choose whether you are connecting the
same bag of syrup or a new bag of syrup of
the SAME flavor. Make selections for each
of the flavors.
NOTE: ALWAYS INSTALL A BAG OF THE
SAME FLAVOR THAT WAS PREVIOUSLY IN
THE TRAY.
20. With the funnel still under the spout, prime
the cleaned syrup lines by pressing START.
This only takes a few moments for each
syrup line and then the process is complete.
21. When priming has finished, remove the
funnel from the cup holder. Discard the
bucket contents.
22. Brush and clean the bucket and funnel
assembly with detergent water. Then rinse
them with warm water (108°F / 42°C) and
dry with single service towels.