8
Installation and Setup
Installing and calibrating TriplePlay requires special care. We’ll guide you through the process in easy-to-follow
steps. Since it may take several hours to download your new software, that process should be started now.
The hardware can be installed while you wait for your downloads to complete. Finally, you can install the soft-
ware and calibrate the system to suit your style.
Download the documents below
http://www.fi shman.com/tripleplay/help
• Software Install Guide (Mac)
• Software Install Guide (Windows)
Follow the step-by-step instructions, and then return here for a few fi nal setup steps. It’s almost time to start
making music!
Final Setup Steps
Charging the Controller
Connect the charge cable to the guitar and plug
into one of your computer’s USB ports, or into a
wall socket using the included adapter.
(fi gure
1)
A small LED on the back plate of your guitar
glows green while the unit is charging and turns
off once the charge is complete. Allow 90 min-
utes for the controller to be fully charged. You
can expect about 20 hours of battery life from
your charged instrument. We recommend fully
charging the TriplePlay setup before using it for
the fi rst time.
Pairing the Controller and Receiver
On fi rst use, you must link the controller and receiver. Complete the procedure below before opening the
TriplePlay software application.
1.
Connect the receiver to one of your computer’s USB ports. The receiver’s LED fl ashes several times per
second, indicating that it’s searching for a controller to link to.
2.
On the guitar’s back plate, move the TriplePlay power switch to ‘On’. Its LED fl ashes, indicating that it’s
searching for a receiver.
fi gure 1
