www.eu.fishersci.com/fisherbrand
20
2.4.1 Installing the Remote Dispenser
a) Each end of cable and port are labeled. Connect tubing and cable to the
designated terminal.
b) Remove the remote dispenser from package and assemble it on a stable
bench.
c) Take out the cable/tubing bundle from the package
d) Connect the 1/4 tubing in the bundle to the dispenser, and the other end to
the back of the RO water system.
e) Connect the 9 Pin data cable to the back of the remote dispenser and the
Accu500 RO system, then tighten the nuts.
The link bundle
