www.eu.fishersci.com/fisherbrand
13
Main Buttons:
START: Start system. Push once after system power up to start the system.
Push again to Standby.
RO:
Controls RO water dispensing. Press once to dispense RO water,
press again to shut RO valve off.
Cursor: To move cursor to set up system parameters.
Indicator Lights:
Power indicator:
Above START Button. Turns RED after power is
on.
RO indicator:
Above RO Button. It turns solid GREEN when
dispensing RO water.
RO indicator light is also used to indicate whether
RO water produced meets preset quality
parameters. If RO water produced does not meet
preset quality requirements, RO indicator light
BLINKS. RO water produced goes to drain. This
automatic operation is behind scene, thus does
not interfere with RO dispensing from the water
tank if there is water in the tank.
Setting indicator:
Above Cursor Button. The light BLINKS indicating
that parameters entered are valid.
