www.eu.fishersci.com/fisherbrand
49
4.6 Replacing the Fuse
The fuse is located in-between the power switch and the power cord receptacle.
The fuse housing has a small notch in the middle of the housing piece. Use a
small head screw driver to pry open the housing. A spare fuse is inside the fuse
housing as indicated in the picture below.
1. Press the Start button to switch system to standby mode, turn off the
system and unplug the power cord from the system
2. Put the head of a small-head screw driver in the notch
3. Use the back wall of the power cord receptacle as the point of support to pry
the housing open
4. Slide the fuse out
5. Replace the blown fuse with the spare fuse located inside the fuse housing
6. Slide the fuse housing back into its original place
A small notch to pry
open the fuse piece
Use this point as
point of support
Push down this end to
pry the fuse piece up
Spare fuse
