www.eu.fishersci.com/fisherbrand
22
3) Cut the included 3/8 inch tubing into two appropriate length tubing for water
inlet and outlet connections.
4) Connect one PE tubing from 3-way ball valve on the tap water outlet to the
water inlet on the Pack (Refer to Illustration above). Connect the other PE
tubing to the water outlet of the Prefiltration pack.
5) Put the outlet tubing into a sink. Turn on tap water and let it run for a few
minutes to flush out impurities which might exist in the pack.
6) Block the water outlet with your finger during the process to check whether
the assembly leaks.
7) Turn off the tap water. Connect the outlet PE tubing to the inlet of the water
system to complete the installation.
Prefiltration stand (cartridge based) installation
A. Take out the prefiltration system from the package and put it on a stable
platform or firmly hang it on wall.
B. Connect the venting ball valve and the prefiltration system.
Outlet pressure
gauge
Inlet pressure
gauge
Prefilter cartridge
Water inlet
Cartridge lock-pin
and notch location
Air outlet
Water outlet
Prefiltration
support
Venting ball valve
