321023
21
5.4
Reset Filter (Selected Models)
When a water filter has been installed in the refrigerator, the yellow
ORDER
light will illuminate when
90 percent of the volume of water for which the filter is rated has passed through the filter
OR
11
months have elepsed since the filter has been installed.
The red
REPLACE
light will illuminate when the rated volume of water has passed through the filter
OR
12 months have elepsed since the filter was installed. A new filter should be installed immediately
when the
REPLACE
light is illuminated.
After replacing the filter, press the
RESET FILTER
keypad for three seconds. The
ORDER
and
REPLACE
lights will go out on the display.
5.5 Vacation
Mode
The Vacation Mode feature causes the freezer to defrost less frequently, conserving energy. The
VACATION MODE
indicator light will illuminate when the feature is activated. To deactivate, press
the
VACATION MODE
keypad again
OR
open either door. The indicator light will go out.
NOTE:
Door openings will not deactivate the Vacation Mode for approximately one hour after
activation.
5.6 Temp
Alarm
The Temp Alarm will alert the customer if the freezer or fresh food compartment temperatures exceed
normal operating temperatures due to a power outage or other event. When activated, the
TEMP
ALARM
light will illuminate.
If the freezer or fresh food temperatures have exceeded these limits, the display will alternately show
the current compartment temperatures and the highest compartment temperature reached when the
power was out. An audible alarm will sound repeatedly.
Press the
TEMP ALARM
keypad once to stop the audible alarm. The
TEMP ALARM
light will
continue to flash and the temperature display will alternate until the temperatures have stabilized.
To turn off Temp Alarm, press and hold the
TEMP ALARM
keypad for three seconds. The indicator
light will go out.
5.7 Door
Alarm
The Door Alarm will alert the customer when one of the doors has been left open for five minutes
continuously. When this happens, an audible alarm will sound every few seconds until the door is
closed
OR
the
DOOR ALARM
keypad is pressed to deactivate the feature.
5.8 Max
Cool
When activated, Max Cool causes the fresh food and freezer compartmentment temperatures to drop
to the minimum settings on the control. This cools down the fresh food and freezer compartments
after extended door openings or when loading the compartments with warm food.
NOTE:
When the Max Cool feature is activated, the temperature setting kaypads will not operate.
To activate, press the
MAX COOL
keypad. Max Cool will deactivate automatically after 12 hours,
OR
press the
MAX COOL
keypad to deactivate the feature.
Summary of Contents for RX256DT4X1
