43
•
Lab 5 Output Format (
Appendix H
)
13.2.2 Lab 2 Customized Output Format
This instrument supports customized Lab 2 output format. Refer to
Appendix E
for details.
13.2.3 Label Printing
This instrument supports the following label printer models: -
•
LP50 by Datecs (
•
TDP247, TDP345, TTP247, TTP345 by TSC (
•
All models with serial communication by Sbarco (
Notes: -
•
Set all preferred operation parameters and label printer model according to paragraph
8
.
•
Refer to
Appendix I
for TSC printer installation, setup procedures and detail on how to create and
upload label to TSC printer by Bartender Label software.
•
Refer to
Appendix J
for Sbarco Printer Installation, setup procedures and detail on how to create and
upload label to Sbarco printer by BarDrawer software.
•
Refer to
Appendix K
for detail on label programming and illustration samples.
14. Alibi Transaction Memory & Management Report
14.1 Alibi Memory Description
This instrument is equipped with Alibi memory to record all individual transaction records.
Management reports can be generated based on data saved in transaction memory, and: -
•
Criteria set forth in F71 (supervisor password is needed to access this internal function), and
•
Format set forth in F33, and
•
Search criteria and time duration set forth in F34.
Notes: -
•
The Alibi memory is independent to those data obtained through memory accumulation (e.g. manual
memory accumulation by pressing
[Print/M+]
key and auto accumulation result by ACC = On in
transmission type Manual and Auto 1 ~ Auto 3) during an operation.
•
Maximum records can be saved = 131,072 transaction.
•
When remaining memory is low: - Instrument displays Li xxx in power on countdown process. xxx is the
number of memory remains before instrument starts overwriting historical records.
•
When memory is full: - Instrument overwrites old records with new record based on first in first out
principle.
An Alibi Management report is constructed of the followings: -
a.
Report Title show report output data range and search criteria.
b.
Report Header explain the nature of an output colume.
c.
Content of Individual transactions.
d.
Footer showing 4 different kinds of totalized results. Refer to paragraph
14.4
for details.
To enable / disable Title, Header and Footer output, simply select
On
or
Off
when being asked. Refer to point
#6 of F33 in paragraph
6.5
for settings.
