28
Accumulation
Note B
Default = On
5
Check Control
Note C
Off / On
Default = Off
■
■
■
■
6
Stability Control
Note D
Yes / No
Default = Yes
■
■
■
■
7
Minimum Output
Weight
Note E
10 ~ 20d in 11 steps
Default = 20d
■
■
■
■
8
Output Format
Note F
Lab 1 ~ Lab 5, LP 50, TSC and
Sbarco
Default = Lab 2
■
■
■
■
9
Other
Procedures
Note H ~ K
Note A: -
Transmission interval is the time interval (in second) between each output. 0 = continuous output.
Note B: -
On = Auto Memory accumulation enabled.
Off = Auto Memory accumulation disabled.
Note C: -
On = (When check function is in effect) Only OK value (value which is within Lo and Hi Limits) will
be transmitted.
Off = (When check function is in effect) Check control is disabled.
Note D: -
Yes = Only stable weight will be transmitted.
No = Transmission is activated when
[Print/M+]
is pressed disregarding the weight stable status.
Note E: -
Minimum weight value to be transmitted. Instrument will not generate any output if the actual weight
is less than the minimum output weight selected here.
Note F: -
Output format description: -
•
Lab 1 = Output in landscape direction. Refer to
Appendix C
for details.
•
Lab 2 = Output in portrait direction. Refer to
Appendix D
& E
for details.
•
Lab 3 = Database output mode. Refer to
Appendix F
for details.
•
Lab 4 = Journal output format with gross and net weight of each individual transaction. Refer
to
Appendix G
for details.
•
Lab 5 = Journal output format with time and net weight of each individual transaction. Refer
to
Appendix H
for details.
•
LP-50/TSC/Sbarco = Output to LP-50 / TSC / Sbarco label printer. Refer to
Appendix I
~ K
for details.
Note G: -
•
Refer to
Appendix A
for Predefined PC Output Prot 1 ~ Prot 9.
•
Refer to
Appendix B
for Customized PC Output Protocol.
Note H: -
If Lab 1 is set in Print format, select line number and press
[Print/M+]
to save. Setup is then
completed.
Note I: -
If Lab 2 is set in Print format, select number of copy and press
[Print/M+]
to save. Setup is then
completed.
Note J: -
If Lab 3, 4 or 5 is set in Print format, press
[Print/M+]
to save. Setup is then completed.
Note K: -
If LP50/TSC/Sbarco is selected: -
a.
Select number of copy (1 ~ 8) and press
[Print/M+]
to continue the below setting,
b.
Select label file number (FL1 00 ~ FL1 99) to print in label format group 1 and press
[Print/M+]
to continue the below setting. FL1 00 = current transaction label printing output disabled.
c.
Select label file number (FL2 00 ~ FL2 99) to print in label format group 2 and press
[Print/M+]
to continue the below setting. FL2 00 = totalized (MR) data label printing output disabled.
