38
11.2.2 Recall quantity check limit from quick PLU
Procedures: -
1.
If more than one weighing platform is used, shift to the preferred platform.
2.
During normal operation status, press
[Qty]
then
[Check]
then
[PLU]
3.
Instrument displays
Recall
on LCD1.
4.
Press the preferred quick PLU number (0~9) and press
[Print/M+]
.
5.
Instrument displays the recalled Lo and high quantity limit then returns to operation status.
At this point, selected quantity check limit is recalled and in effect.
11.2.3 Clear quantity check limit from quick PLU
To clear quantity check limit from quick PLU, follow paragraph
11.2.1
and enter zero value in steps
3
and
4
.
11.3 Weight Check Limit Quick PLU
11.3.1 Create & save weight check limit to quick PLU
Procedures: -
1.
If more than one weighing platform is used, shift to the preferred platform.
2.
During normal operation status, press
[@WT]
then
[Check].
3.
Enter Lo weight check limit and press
[Print/M+]
.
4.
Enter Hi weight check limit then long press
[Check]
.
5.
Instrument displays
Save
on LCD1.
6.
Save weight check limit to a preferred quick PLU by pressing the quick PLU number (0~9) and press
[Print/M+]
.
At this point, weight check limit is saved and in effect.
11.3.2 Recall weight check limit from quick PLU
Procedures: -
1.
If more than one weighing platform is used, shift to the preferred platform.
2.
During normal operation status, press
[@WT]
then
[Check]
then
[PLU]
3.
Instrument displays
Recall
on LCD1.
4.
Press the preferred quick PLU number (0~9) and press
[Print/M+]
.
5.
Instrument displayed the recalled Lo and high weight limit then returns to operation status.
At this point, selected weight check limit is recalled and in effect.
11.3.3 Clear weight check limit from quick PLU
To clear weight check limit from quick PLU, follow paragraph
11.3.1
and enter zero value in steps
3
and
4
.
11.4 Preset Tare Value Quick PLU
11.4.1 Create & save preset tare value to quick PLU
Procedures: -
1.
If more than one weighing platform is used, shift to the preferred platform.
2.
During normal operation status, enter the preset tare value through numeric keys.
3.
Long press
[Tare]
. Instrument displays
Save
on LCD1.
4.
Save preset tare value to a preferred quick PLU by pressing the quick PLU number (0~9) and press
[Print/M+]
.
5.
Instrument displays
Done
on LCD3.
At this point, preset tare value is saved and in effect.
