93
Appendix U: Customized Operation Settings PLU Reading Commands
Customized operation settings PLU reading commands format as below: -
a.
Start String
*
“asterisk” (Hex code 02A), then followed by
b.
Command string listed on below table, then followed by
c.
Parameters listed on below table. Always insert semi colon (;) in front of each parameter, followed by
d.
End String
#
“number sign” ((Hex code 23).
Notes: -
For RS485 communication, add @xx before start string.
xx = machine ID number set in F18.
U.1 Command Description Table
Start
String
Command Code
(Note H)
Parameter &
End String
Parameter Output
*
R1 or R2 or RA
LP
;01~;99 or ;A
(01~99 = PLU number. A = all)
d1;d2;d3… ;d14
Remark: If parameter A is entered, instrument sends content of quick from PLU 01 to PLU 99 in numeric sequent.
Note H
: -
R1 = command to read PLU content of P1.
R2= command to read PLU content of P2.
RA = command to read PLU content of PA.
Refer to below table for content of output. A semi colon is inserted between parameters.
