Fibrain FSR-R2 User’s Manual
89
Add Port Range Forwarding Rule
Click on Add. The following page is displayed:
Field
Description
Sequence Number
This defines the sequences (priorities) of the port forwarding rules. If
a packet fits the conditions setup by the port forwarding rules, the
packet will then be forwarded according to the 1st rule from the top
of the list.
Rule Name
Enter the name of the port forwarding rule.
Rule Enable
Check/Uncheck to enable/disable this port forwarding rule.
External Interface
Choose WAN1 as the External port forwarding interface.
Protocol
Choose TCP, UDP or TCP/UDP for the rule to be applied.
External Port
Range
Set up the External Port Range for the rule to be applied.
Internal IP
Set up the Internal IP for the rule to be applied.
Internal Port
Range
Set up the Internal Port Range for the rule to be applied.
Summary of Contents for FSR-R2
