Fibrain FSR-R2 User’s Manual
48
PPPoE
Please enter the information accordingly provided by ISP.
Field
Description
WAN
Select Enable / Disable to enable/disable WAN.
Connection Type
PPPoE
Authentication
Select authentication type for PPPoE
User Name
The user name offered by the ISP.
Password
The password offered by the ISP.
On Demand: Max
Idle Time
PPPoE On Demand will only be activated when there is traffic.
When there is no traffic within max. idle time (default: 300 seconds),
PPPoE will be disconnected.
Keep Alive
PPPoE Keep Alive will maintain the PPPoE dial up connection.
PPPoE Echo
Interval
PPPoE echo will ensure whether the link is still up or not (default
interval 20 seconds)
PPPoE Retry
Threshold
When PPPoE echo retry exceeds PPPoE Retry Threshold (default
20 times), the dial up connection would be recognized as down.
PPPoE MTU
PPPoE maximum transmission unit: up to 1492 bytes (PPPoE’s
header is 8 bytes)(This value should be less than MTU value at least
8 bytes ).
MTU
Physical Device Maximum Transmission Unit
Summary of Contents for FSR-R2
