Fibrain FSR-R2 User’s Manual
49
8
Local Area Network (LAN) Settings
To set up the configuration of LAN interface, private IP of your
router LAN port and subnet mask for your LAN segment.
Default IP is 192.168.200.254.
From the Configuration menu, click on LAN. The following page
is displayed:
Field
Description
Internal IP
Address
The IP of your Router LAN port (default 192.168.200.254).
Netmask
Select Netmask from the drop-down list. Subnet Mask of you LAN
(default 255.255.255.0). All devices on the network must have the same
subnet mask to communicate on the network.
Spanning Tree
Protocol (STP)
Click Enable to avoid cyclic topology caused by incorrect connection of
your internal network. (A cyclic topology will cause network
breakdown.)
MTU
Maximum transmission unit: up to 1500 bytes.
Summary of Contents for FSR-R2
