Fibrain FSR-R2 User’s Manual
67
17
Wireless - Universal Repeater Setting
The Universal Repeater function is similar with WDS in that it is
used to essentially enlarge the area of wireless network
coverage. However, unlike WDS, Universal Repeater offers
simplicity in configuration requirements, as users only need to
configure the current AP as a client, and to connect it to the
second AP’s SSID (or BSSID). However, you need to ensure
that the two APs are using the same wireless channel and
security mode (and key) for Universal Repeater to work
effectively.
From the Wireless menu, click on Universal Repeater. The
following page is displayed:
Field
Description
Universal
Repeater
Select Enable to enable Universal Repeater function. Select Disable to
disable Universal Repeater function.
Target SSID
Enter the target SSID to connect to.
Target BSSID
(MAC)
Enter the target BSSID to connect to. The BSSID is optional if you setup
the target SSID.
Security Mode
Choose the security mode the target AP uses, and enter the key if
needed.
Summary of Contents for FSR-R2
