Fibrain FSR-R2 User’s Manual
51
Field
Description
Sequence Number
This defines the sequence of the Routing rules. If a packet fits the
conditions set by the Routing rules, the packet will then be sorted
according to the first Routing rule from the top of the list.
Rule Name
Name of the Routing rule.
Rule Enable
Enable/Disable this Routing rule
External Interface
Please select which External Interface (WAN1 or WAN2) you want
for a packet to go through, IF the packet fits the condition of this
ACL rule.
Internal IP Range
Set up the internal IP range for this ACL rule.
External IP Range
Set up the external IP range for this ACL rule.
Protocol
Set up the protocol (TCP or UDP) for the ACL to be enabled.
Service Port Range
Set up the Service Port Range (e.g., HTTP is TCP/80) for the ACL to
be enabled.
External Interface
Please select which External Interface (WAN1 or WAN2) you want
for a packet to be routed, IF the packet fits the condition of this
Routing rule.
Example of Routing Rule
Rule Name
SMTP outgoing routing
Enable
Enable
Internal IP Range
Blank (applied to all)
External IP Range
Blank (applied to all)
Protocol
TCP
Service Port Range
25:25 (SMTP Port:25)
External Interface
WAN1
Summary of Contents for FSR-R2
