Fibrain FSR-R2 User’s Manual
72
Add Access Control List (ACL) Rule
Click on Add. The following page is displayed:
Field
Description
Sequence
Number
This defines the sequence of the ACL rules. If a packet fits the
conditions set by the ACL rules, the packet will then be sorted
according to the first ACL rule from the top of the list.
Rule Name
Name of the ACL rule.
Rule Enable
Enable/Disable this ACL rule
External
Interface
Please select which External Interface (WAN1 or WAN2) you want a
packet to go through, IF the packet fits the condition of this ACL rule.
Internal IP
Range
Set up the internal IP range for this ACL rule.
External IP
Range
Set up the external IP range for this ACL rule.
Protocol
Set up the protocol (TCP or UDP) for the ACL to be enabled.
Service Port
Range
Set up the Service Port Range (e.g., HTTP is TCP/80) for the ACL to be
enabled.
Action
Select ALLOW / DENY
Summary of Contents for FSR-R2
