Fibrain FSR-R2 User’s Manual
41
6
Getting Started with the Web pages
The Wireless Gateway includes a series of Web pages that
provide an interface to the software installed on the device. It
enables you to configure the device settings to meet the needs
of your network. You can access it through your web browser
from any PC connected to the device via
the LAN ports.
Accessing the Web pages
To access the Web pages, you need the following:
•
A PC or laptop connected to the LAN port on the device.
•
A web browser installed on the PC. The minimum browser
version requirement is Internet Explorer v4 or Netscape v4.
For the best display quality, use latest version of Internet
Explorer, Netscape or Mozilla Firefox.From any of the LAN
computers, launch your web browser, type the following
URL in the web address (or location) box, and press [Enter]
on your keyboard:
http://192.168.200.254
The first time that you click on an entry from the left-
hand menu, a login box is displayed. You must enter
your username and password to access the pages.
A login screen is displayed:
Figure 6:
Login screen
1. Enter your user name and password. The first time you log
into the program, use these defaults:
Administrator Level
User Name:
root
Password:
fibrain
User Level
User Name:
admin
Password:
admin
Note
You can change the password at any time or you can configure your
device so that you do not need to enter a password. See Password.
Summary of Contents for FSR-R2
