Fibrain FSR-R2, User Manual

Page: 60 / 132

Fibrain FSR-R2 User’s Manual
60
SSID Settings
Users are able to configure each SSID with its own attributes.
Further, various security modes are available based on the
user’s needs and preference: Disable, WEP, WPA Pre-Shared
Key, WPA, WPA2 Pre-Shared Key, and WPA2. However, it is
important to note that all devices under the wireless network
must use the same security mode.
You can configure the security settings of your wireless network
to suit your desired preference. Different methods will grant
different levels of security. Using encryption - data packet is
encrypted before transmission - can prevent data packets from
being intruded on by un-trusted parties. However, please note
that the higher the security level is, the lower the data
throughput becomes.
Field Description
Wireless SSID Select Enable if you would like to turn on this SSID.
Select Disable if you would like to turn off this SSID.
Wireless SSID
Name Enter the wireless station name you would like to have.
Wireless SSID
Broadcasting The device broadcasts SSID periodically. Select Enable to turn it on
or Disable to turn it off. Enabling SSID Broadcasting brings
convenience for users to find and connect the device. Disabling
SSID broadcasting enhances the security by hiding SSID
information.
Wi-Fi Multimedia
(WMM) Select Enable to prioritize different traffic types based on their
characteristics. For example, VoIP or video traffic will have higher
priorities over ordinary traffic.
Wireless Isolation Select Enable if you would like to omit the access to other network
devices connecting to this SSID. Select Disable if you would like to
allow the access to other network devices connecting to this SSID.
Max Station
Connection(Number
1~255, 0:unlimited) Max Station Connection Number of client
Security Mode Configure the security to Disable, WEP, WPA Pre-Shared Key, WPA,
WPA2 Pre-Shared Key, and WPA2