13
operatIng the DevIce
1
2
3
1. First button,
2. Second button,
3. LED ring.
7.2:
Single/double switch operating mode
The device can work as single or double switch:
• Double switch mode (default) – the device can control two
separate loads, but they can be up to 13A per channel and
16A total.
• Single switch mode – the device can control only one load,
but it can be rated up to 16A.
i
Changing operating mode must performed be-
fore adding it to the Z-Wave network!
To change or check the operating mode:
1. Quickly, three times click, then press and hold one of the
buttons to enter the menu
2. Release button when the device glows white.
3. Quickly click the button to confirm.
4. If the device is not added to the Z-Wave network, it change
the mode to the opposite one.
5. The device will signal current operating mode:
• 1 white blink – single switch mode,
• 2 white blinks – double switch mode.
7:
Operating the device
7.1:
Controls
