12
removIng from Z-Wave netWork
6:
Removing from Z-Wave network
Removing (Exclusion)
– Z-Wave device learning mode, allowing to
remove the device from existing Z-Wave network. Removing also re-
sults in resetting the device to factory defaults.
To
remove
the device from the Z-Wave network:
1. Power the device.
2. Set the main controller into remove mode (see the controller’s
manual).
3. Quickly, three times click one of the buttons.
4. Wait for the removing process to start (up to few minutes), which
is signalled with yellow LED blinking.
5. Successful removing will be confirmed by the Z-Wave controller’s
message and red LED colour.
