Fiat 2013 500 ABARTH Owner'S Manual Download Page 26 | Manualshive

Page: 26 / 413

background image

To open the liftgate, squeeze the liftgate release handle
and pull the liftgate open with one fluid motion.

WARNING!

•

Driving with the liftgate open can allow poisonous
exhaust gases into your vehicle. You and your
passengers could be injured by these fumes. Keep
the liftgate closed when you are operating the
vehicle.

•

If you are required to drive with the liftgate open,
make sure that all windows are closed, and the
climate control blower switch is set at high speed.
Do not use the recirculation mode.

Gas props support the liftgate in the open position.
However, because the gas pressure drops with tempera-
ture, it may be necessary to assist the props when
opening the liftgate in cold weather.

Liftgate Handle

24

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
24
25
26
27
28
...
»

Summary of Contents for 2013 500 ABARTH






























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 500 ABARTH

Brand: Pacbrake Pages: 9

Brand: Honda Pages: 73

Brand: FABBRI PORTATUTTO Pages: 2

Brute Strength 12057.0271

Brand: Quadratec Pages: 6

Brand: Victory 4x4 Pages: 13

Brand: Mazdaspeed Pages: 8

Brand: Nav TV Pages: 3

Brand: Whispbar Pages: 15

Brand: Quadratec Pages: 12

Brand: MULTILIFT Pages: 62

Brand: Volvo Pages: 42

Brand: Subaru Pages: 2

Brand: Whispbar Pages: 77

Brand: Cadillac Pages: 78

Brand: Curt Manufacturing Pages: 4

Brand: Prorack Pages: 14

Brand: Bazooka Pages: 2

Brand: Volkswagen Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands