Fiat 2013 500 ABARTH Owner'S Manual Download Page 19

Page: 19 / 413

2. This device must accept any interference that may be

received including interference that may cause unde-
sired operation.

NOTE:

Changes or modifications not expressly ap-

proved by the party responsible for compliance could
void the user’s authority to operate the equipment.

If your RKE transmitter fails to operate from a normal
distance, check for these two conditions:

1. Weak battery in RKE transmitter. The expected life of

the battery is from one to two years.

2. Closeness to a radio transmitter such as a radio station

tower, airport transmitter, and some mobile or CB
radios.

Transmitter Battery Replacement

NOTE:

Perchlorate Material – special handling may ap-

ply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

The recommended replacement battery is CR2032.

1. Press the mechanical key release button and release

the mechanical key to access the battery case screw
located on the side of the Key Fob.

Mechanical Key Release Button

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2013 500 ABARTH






























































































































































































































































































































































































































Search results

Summary of Contents for 2013 500 ABARTH

Reviews:

Related manuals for 2013 500 ABARTH

Brands by name

Popular brands

Fiat 2013 500 ABARTH, Owner'S Manual

Search results

Summary of Contents for 2013 500 ABARTH

Reviews:

Related manuals for 2013 500 ABARTH

Brands by name

Popular brands