Fiat 2013 500 ABARTH, Owner'S Manual

Page: 192 / 413

Frequency Band Selection
With the Radio mode active, press the FM or AM tuner
button briefly and repeatedly to select the desired recep-
tion band.
Each time the button is pressed the following bands are
selected cyclically:
•
AM, FM or SAT (if equipped)
Each band is highlighted by the corresponding wordings
on the display. The radio will be tuned to last station
selected on the respective frequency band.
Preset Buttons
The buttons numbered from 1 to 5 are used to set the
following pre-selections:
•
15 in the FM band (5 in FMA, 5 in FMB, 5 in FMC
•
10 in the AM band (5 in AMA, 5 in AMB)
•
15 in SAT (if so equipped) (5 SATA, 5 SATB, 5 SATC)
To listen to a preset station, select the desired frequency
band and then briefly press the corresponding preset
button (from 1 to 5).
By pressing the preset button for more than 2 seconds,
the tuned station will be stored. Pressing the A-B-C
button will change between the preset memory group in
the current frequency band.
Automatic Tuning
Briefly press the or button to start the automatic
tuning search for the next station that can be received in
the selected direction.
If the or button is pressed for longer, the rapid
search is started. When the button is released, the tuner
will stop on the next station that can be received.
190 UNDERSTANDING YOUR INSTRUMENT PANEL