Fiat 2013 500 ABARTH Owner'S Manual Download Page 172

Page: 172 / 413

6. Briefly press the

SET ESC

button to return to the

sub-menu.

7. When accessing the “Fuel Economy” submenu, briefly

press the

SET ESC

button. Either “mpg,” “km/l ” or

“l/100km” will appear on the display (according to
the previous setting).

If the distance unit set is “mi,” the fuel economy unit will
be displayed in “mpg.”

If the distance unit set is “km,” the fuel economy unit will
be displayed in either km/l or l/100km.

1. Press the UP

or DOWN

button for setting.

2. Briefly press the

SET ESC

button to return to the

sub-menu.

3. When accessing the “Temperature” submenu: briefly

press the

SET ESC

button. Either “°F” or “°C” will

appear on the display (according to the previous
setting).

4. Press the UP

or DOWN

button for setting.

5. Briefly press the

SET ESC

button to return to the

sub-menu.

When you have made the required settings, briefly press
the

SET ESC

button to go back to the sub-menu screen,

or press and hold the

SET ESC

button (approximately

one second) to go back to the main screen without storing
the settings.

Language (Selecting The Language)

The messages can be displayed in the following lan-
guages: Italian, English, German, Portuguese, Spanish,
French, Dutch, Polish.

170

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2013 500 ABARTH






























































































































































































































































































































































































































Search results

Summary of Contents for 2013 500 ABARTH

Reviews:

Related manuals for 2013 500 ABARTH

Brands by name

Popular brands

Fiat 2013 500 ABARTH, Owner'S Manual

Search results

Summary of Contents for 2013 500 ABARTH

Reviews:

Related manuals for 2013 500 ABARTH

Brands by name

Popular brands