Fiat 2013 500 ABARTH Owner'S Manual Download Page 41 | Manualshive

Page: 41 / 413

background image

NOTE:

The Driver and Passenger Advanced Front Air

Bags are certified to new Federal regulations for Ad-
vanced Air Bags.

The Advanced Front Air Bags are designed to allow the
air bags to have different inflation levels based on several
factors, including the severity and type of collision.

This vehicle may be equipped with driver and/or front
passenger seat track position sensors that may adjust the
inflation level of the Advanced Front Air Bags based
upon seat position.

This vehicle may be equipped with a driver and/or front
passenger seat belt buckle switch that detects whether
the driver or front passenger seat belt is fastened. The
seat belt buckle switch may adjust the inflation level of
the Advanced Front Air Bags.

This vehicle is equipped with Supplemental Side Air Bag
Inflatable Curtains (SABIC) to protect the driver, front,

Advanced Front Air Bag And Knee Bolster Locations

1 — Driver And Passenger Ad-
vanced Front Air Bags

3 — Supplemental Driver Side
Knee Air Bag

2 — Knee Bolster

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

39

«
...
39
40
41
42
43
...
»

Summary of Contents for 2013 500 ABARTH






























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 500 ABARTH

Brand: GMC Pages: 140

Brand: ULTIMATE SPEED Pages: 19

Brand: Vauxhall Pages: 177

Brand: Toyota Pages: 56

Brand: GOgroove Pages: 9

Brand: Axxess Pages: 8

Brand: SeaSucker Pages: 9

Brand: MVG Pages: 18

Brand: Prorack Pages: 15

Brand: Porsche Pages: 146

OUTLANDER PHEV 2022

Brand: Mitsubishi MOTORS Pages: 8

Prestige 128-8602

Brand: Audiovox Pages: 8

Brand: Seat Pages: 300

EPS-LD SafePark

Brand: Tobe Pages: 2

Brand: Whispbar Pages: 18

Brand: Honda Pages: 279

Brand: Chevrolet Pages: 55

FreshSesh PowderHound

Brand: Yakima Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands