3. Proportional pressure regulator
3−6
Festo P.BE−MPA−ELECTRONIC−EN en 0804NH
3.1.4
Parameterising the proportional pressure regulator
The following table provides an overview of the proportional
pressure regulator parameters. Sections Tab.3/4 to Tab.3/8
provide detailed information.
Function number
1)
Parameters of the proportional pressure regulator
4828 + m * 64 +
0
Monitoring parameterisation faults
Activate limit monitoring for the output word
Load voltage monitoring V
out
/V
Val
4828 + m * 64 +
6
Unit for pressure specifications (limit values and current pressure
value)
4828 + m * 64 +
7
Control behaviour (Presets)
Input signal type
Measured value smoothing
4828 + m * 64 +
8 ... 11
Condition counter
4828 + m * 64 +
12
4828 + m * 64 +
13
Lower limit value Low Byte
Lower limit value High Byte
4828 + m * 64 +
14
4828 + m * 64 +
15
Upper limit value Low Byte
Upper limit value High Byte
4828 + m * 64 +
16 ... 19
Serial number of the VPPM/MPA
1)
m = Module number of the proportional pressure regulator (1 ... 47)
Tab.3/3: Overview of the parameters of the proportional pressure regulator
Summary of Contents for VMPA-FB-PS Series
