2. MPA pressure sensor
2−6
Festo P.BE−MPA−ELECTRONIC−EN en 0804NH
Module parameter: Monitoring parameterisation faults
Handheld
Function no.
4828 + m * 64 +
0
m = module number of the MPA pressure sensor (1 ... 47)
Description
Monitors the parameterisation of the module (plausibility checking of the values
set for limits and hysteresis)
An error message is generated for the following implausible settings:
Upper limit value < lower limit value
Upper limit value > 10000 or < 0, lower limit value < 0 or > 10000
Hysteresis < 0 or > (upper limit value lower limit value)
Bit
Bit 7
[Monitor parameters]
Values
Bit 7 Setting:
0 inactive
1 active (default)
Tab.2/3: Monitoring parameterisation faults
Module parameter: Unit for pressure specifications
Handheld
Function no.
4828 + m * 64 +
6
m = module number of the MPA pressure sensor (1 ... 47)
Description
Sets the unit for pressure specifications (limit values, hysteresis and current
pressure value).
Bit
Bits 1, 0
[Dimension unit]
Values
Bit 4 3 2 1 0 Setting:
Resolution:
x
x
x
0 0 mbar (default)
1 mbar/Bit
x
x
x
0 1 kPa
1 kPa/Bit
x
x
x
1 0 psi
0.1 psi/Bit
x
x
x
1 1 reserved
Note
When changing the unit, the parameters for the limit values and hysteresis are
not automatically converted. When changing the unit, you must therefore be
sure to also change the parameters for the upper/lower limit values and the
hysteresis.
Tab.2/4: Setting the unit for pressure specifications
Summary of Contents for VMPA-FB-PS Series
