1. MPA pneumatic modules
1−16
Festo P.BE−MPA−ELECTRONIC−EN en 0804NH
1.4
Parameterising
The reaction of the MPA pneumatic modules can be para
meterised. The following table provides an overview of the
MPA pneumatic module parameters. Detailed information can
be found in sections 1.4.1 and 1.4.2.
Function number
1)
Parameters of the MPA
pneumatic modules
MPA
MPA with
D2−Diag.
4828 + m * 64 +
0
Monitoring the CPX module
Undervoltage at valves
see Tab.1/5
Protocol−specific via Field
bus/network
Fail safe channel x
Idle mode channel x
Forcing channel x
see Tab.1/6
see Tab.1/7
see Tab.1/8
4828 + m * 64 +
0
Monitoring the CPX module
(Short circuit in valve coil volt
age)
see Tab.1/9
4828 + m * 64 +
6
Wire fracture (Open Load) at
solenoid coil
see Tab.1/10
4828 + m * 64 +
8...23
Condition counter for MPA2 and
MPA1 solenoid coils
see Tab.1/11
4828 + m * 64 +
24...39
Condition counter for MPA1 and
solenoid coils
see Tab.1/11
1)
m = Module number of the MPA pneumatic module (1 ... 47)
Tab.1/4: Overview of the parameters of the MPA pneumatic modules
Additional information on parameterisation is provided in the
CPX system description and the bus node description.
Summary of Contents for VMPA-FB-PS Series
