2. MPA pressure sensor
2−5
Festo P.BE−MPA−ELECTRONIC−EN en 0804NH
2.1.4
Parameterising the MPA pressure sensor
The following table provides an overview of the MPA pressure
sensor parameters. Sections Tab.2/3 to Tab.2/9 pro vide
detailed information.
Function number
1)
Parameters of the MPA pressure sensor module
4828 + m * 64 +
0
Monitoring parameterisation faults
4828 + m * 64 +
6
Unit for pressure specifications (limit values and current pressure
value)
Delay for pressure diagnosis
4828 + m * 64 +
7
Activate and set limit value monitoring
4828 + m * 64 +
8
Measured value smoothing
4828 + m * 64 +
9
4828 + m * 64 +
10
Lower limit value Low Byte
Lower limit value High Byte
4828 + m * 64 +
11
4828 + m * 64 +
12
Upper limit value Low Byte
Upper limit value High Byte
4828 + m * 64 +
13
4828 + m * 64 +
14
Hysteresis Low Byte
Hysteresis High Byte
1)
m = Module number of the MPA pressure sensor (1 ... 47)
Tab.2/2: Overview of the parameters of the MPA pressure sensor
Summary of Contents for VMPA-FB-PS Series
