Festo CPX-P-8DE-N Series, Description

Page: 42 / 132

2. Mounting and dismantling
2-8
Festo P.BE-CPX-P-EA-EN en 1209NH English
3. Make sure the snap hooks are facing upwards and
position the coding element (
5
) on the coding pin of the
electronics module (
4
) as shown in Fig. 2/3. This
ensures the correct orientation of the coding element.
1
Connection
block
*)
2
Snap hook on
coding element
3
Interlinking block
with electronics
module
*)
4
Coding pin on the
electronics mod-
ule
5
Coding element
*)
*)
exemplary rep-
resentation
1
3
4
2
5
Fig. 2/3: Mechanical coding of a connection block
4. Align the connection block (
1
) over the interlinking
block with the electronics module. Make sure that the
plug connectors of the sub-base are aligned exactly with
the connectors of the electronic module.
5. Place the connection block carefully and without tilting
onto the electronics module until the coding element en-
gages in the designated recess on the underside of the
connection block.