Festo CPX-P-8DE-N Series, Description

Page: 48 / 132

2. Mounting and dismantling
2-14
Festo P.BE-CPX-P-EA-EN en 1209NH English
Dismantling Dismantle the connection block as follows ( Fig. 2/5):
1. Loosen the 4 screws (
2
) from the relevant connection
block or module by using a Torx screwdriver (size T10).
2. Pull the connection block (
1
) carefully and without tilt-
ing away from the electrical plug connection of the elec-
tronics module (
3
).
Only in cases where the electronic module is to be removed:
•
Pull the electronics module (
3
) carefully and without
tilting away from the contact rails of the interlinking block
(
4
).
2.2.4 Mounting and dismantling the insulating plate
To ensure intrinsic safety is maintained, the connection areas
for intrinsically safe circuits and non-intrinsically safe circuits
are to be separated by an insulating plate (
Tab. 2/1).
Mounting the insulating plate
•
Press the insulating plate (
2
) lightly into the insulating
plate slot (
1
) as illustrated ( Fig. 2/6) until the insu-
lating plate engages.