Festo CPX-P-8DE-N Series, Description

Page: 13 / 132

Contents and general instructions
XI
Festo P.BE-CPX-P-EA-EN en 1209NH English
– Operation of CPX-P modules that are designed for non -in-
trinsically safe circuits with connection blocks that are
designed for intrinsically safe circuits is impermissible.
– Operation of CPX-P modules within standard variants of
the CPX terminal is impermissible.
Requirements for product use
•
Compare the limit values specified in this description with
your actual application (e.g. forces, torques, temperat-
ures, voltages, etc.).
•
Take into consideration the ambient conditions at the
location of use.
•
Comply with the regulations of the trade association, the
German Technical Control Board (TÜV), of the VDE or rel-
evant national regulations.
•
The material used in the packaging has been specifically
chosen for its recyclability (exception: oil paper = residual
waste).
•
Use the product in its original state. Unauthorised modi-
fication is not permitted.
•
Before carrying out assembly, installation and mainten-
ance work, switch off the operating voltage supply and, if
applicable, the load voltage supply.
Target group
This description is intended exclusively for technicians
trained in control and automation technology who are familiar
with the installation and operation of control systems.
Service
Please consult your local Festo Service if you have any tech-
nical problems.