Festo CPA VI Series, Manual

Page: 96 / 110

Fitting
1. If you wish to add valve locations, fit the appropriate
manifold block (EV1 or EV2) onto the sub-base.
Then fit all the valve locations and the end plate
(see section "Replacing valve, reserve and addi-
tional pressure supply plates" in this chapter).
2. Fit the appropriate components into the empty valve
locations (see section "Replacing the end plate, sub-
base or manifold block" in this chapter).
3. Fit the CPA valve terminal onto its mounting surface
(see chapter 2 "Fitting," section "Fitting onto a wall"
or "Fitting onto a hat rail").
5. Maintenance and conversion
5-28
CPA... 9808A