Festo CPA VI Series, Manual

Page: 94 / 110

Components for removing valve locations
When valve locations are removed, the tie rods must
be adapted accordingly.
You will require:
Components Typ
Basis tie rod
(graduation: 2, 4, 6 to 22) CPA..-ZA-2
.
.
CPA..-ZA-22
If necessary, short tie rod screw (for valve termi-
nals with an even number of valve locations) CPA..-ZA-SK
Long tie rod screw (for valve terminals with an
odd number of valve locations) CPA..-ZA-SL
The table below shows the tie rod components which
you will require to adapt the length of the tie rod.
Number*
)
Starting basis: valve terminals
with an even number of valve
locations Starting basis: valve terminals
with an odd number of valve
locations
- 1 2 basis tie rods and
2 long tie rod screws 2 short tie rod screws
- 2 2 basis tie rods 2 basis tie rods
- 3 2 basis tie rods and
2 long tie rod screws 2 basis tie rods and
2 short tie rod screws
> - 3 2 basis tie rods or.
2 long tie rod screws 2 basis tie rods or
2 short tie rod screws
*
)
number of valve locations to be removed
5. Maintenance and conversion
5-26
CPA... 9808A