Designated use
The CPA valve terminals described in this documenta-
tion have been designed exclusively for controlling
pneumatic actuators and may only be used in conjunc-
tion with devices and components of other manufac-
turers, where these have been recommended or ap-
proved of by Festo:
– according to designated use
– in their original state
– without modifications by the customer
– in a faultless technical state.
The specified limits for pressures, temperatures, electri-
cal data, torques, etc. must be observed.
Please observe the regulations of the relevant national
and/or local technical authorities.
Target group
This manual is intended exclusively for personnel
trained in control and automation technology who have
experience in fitting, installing, commissioning, servicing
and converting pneumatic components.
CPA... 9808A
V
Summary of Contents for CPA VI Series
