Festo CPA VI Series, Manual, Page: 19 / 110

This CPA valve terminal is available with 2 to max. 22
single solenoid valves or 11 double solenoid valve loca-
tions. Max. 22 valve coils can be controlled. The electri-
cal connection for the valve solenoid coils is made cen-
trally via the multipin plug. CPA valve ter-
minal with
MP con-
nection
The CPA valve terminal with CP connection is available
with 2 to max. 16 single solenoid valves or max. 8
double solenoid valve locations. Max. 16 valve coils can
be controlled. The connection to the higher-order field
bus node is made via a special ready-to-use CP cable. CPA valve ter-
minal with
CP con-
nection
This CPA valve terminal is connected to the AS-i bus by
means of a special AS-i cable. It is available with two
types of electrical connections:
CPA valve ter-
minal with
AS-i con-
nection
– with additional supply connection (load voltage can
be switched off separately)
– without additional supply connections
Both variants are available with 2 to max. 4 single sole-
noid valve locations or max. 2 double solenoid valve
locations. Max. 4 valve coils can be controlled.
All CPA valve terminal variants are available with micro
valves (width of valve 10 mm, CPV10) or with mini
valves (width of valve 14 mm, CPV14). Mixed fitting
with both types of grid dimensions is not possible on a
CPA valve terminal. Sizes of the
CPA valve ter-
minal
1. System summary
CPA... 9808A
1-5