CAMC-G-S1
Festo – GDCP-CAMC-G-S1-EN – 1412b – English
5
Instructions on this documentation
This documentation serves to ensure that work with the safety function STO - “Safe Torque Off ” in ac
cordance with EN 61800-5-2 is performed safely by using the safety module CAMC-G-S1 for motor con
troller CMMP-AS-...-M3.
In addition, always observe the general safety regulations for the CMMP-AS-…-M3.
The general safety regulations for the CMMP-AS-...-M3 can be found in the hardware
documentation, GDCP-CMMP-M3-HW-...
è
Observe the information regarding safety and the requirements for product use in
Product identification
This documentation refers to the following versions:
–
Safety module CAMC-G-S1, from revision 03.
–
Motor controller CMMP-AS-…-M3, firmware from version 4.0.1501.1.1.
–
FCT plug-in CMMP-AS from version 2.3.x.
Rating plate (example)
Significance
1501330
CAMC-G-S1
XX #nnnnn
Rev XX
ESD
Type designation
CAMC-G-S1
Part number
1501330
Date of manufacture
XX
Serial number
#nnnnn
Revision status
Rev XX
Tab. 1
Rating plate CAMC-G-S1
Service
Please consult your regional Festo contact if you have any technical problems.
Specified standards/guidelines
Issue status
EN 61800-5-1:2007-09
EN ISO 12100-1:2010-11
EN 61800-5-2:2007-10
EN ISO 13849-1:2008-06/AC:2009-03
EN 60204-1:2006-06/A1:2009-02
IEC 61131-2:2007-09
EN 62061:2005-04/AC:2010-02/A1:2013-02
IEC 61508-1/.../-7:2010-04
Tab. 2
Standards/directives specified in the document
