CAMC-G-S1
Festo – GDCP-CAMC-G-S1-EN – 1412b – English
7
Documentation
You will find additional information on the motor controller in the following documentation:
User documentation on the motor controller CMMP-AS-...-M3
Name, type
Contents
Hardware description,
GDCP-CMMP-M3-HW-...
Mounting and installation of the motor controller
CMMP-AS-...
-M3
for all variants/output classes (1-phase,
3-phase), pin assignments, error messages, maintenance.
Description of functions,
GDCP-CMMP-M3-FW-...
Functional description (firmware) CMMP-AS-...
-M3,
Instructions
on commissioning.
Description FHPP,
GDCP-CMMP-M3/-M0-C-HP-...
Control and parameterisation of the motor controller via the
FHPP Festo profile.
–
Motor controller CMMP-AS-...
-M3
with the following field
busses: CANopen, PROFINET, PROFIBUS, EtherNet/IP, Devi
ceNet, EtherCAT.
–
Motor controller CMMP-AS-...
-M0
with fieldbus CANopen.
Description CiA 402 (DS 402),
GDCP-CMMP-M3/-M0-C-CO-...
Control and parameterisation of the motor controller via the
device profile CiA 402 (DS 402)
–
Motor controller CMMP-AS-...
-M3
with the following field
busses: CANopen and EtherCAT.
–
Motor controller CMMP-AS-...
-M0
with fieldbus CANopen.
Description CAM-Editor,
P.BE-CMMP-CAM-SW-...
Cam disc function (CAM) of the motor controller
CMMP-AS-...
-M3/-M0
.
Description safety module,
GDCP-CAMC-G-S1-...
Functional safety engineering for the motor controller with the
safety function STO.
Description safety module,
GDCP-CAMC-G-S3-...
Functional safety engineering for the motor controller with the
safety functions STO, SS1, SS2, SOS, SBC, SLS, SSR, SSM.
Help for the FCT plug-in CMMP-AS
User interface and functions of the CMMP-AS plug-in for the
Festo Configuration Tool
è
www.festo.com/sp.
Tab. 5
Documentation on the motor controller CMMP-AS-...-M3
