FENDT 916 Vario, Operating Manual

Page: 2 / 267

Vehicle delivery
Vehicle pre-delivery inspection by the Service Workshop
For information, technical date etc. refer to Service Schedule.
Check oil level, top up if necessary.
Engine, transmission, axle drives, front axle differential, hub drives, front PTO, lift shaft
lubrication. Fill the hydraulic system with additional oil for external consumers as per
customer order.
Check fluid level, and top up if necessary.
Cooling system, clutch operation, brake actuation, air conditioning if installed.
Grease vehicle as per Lubrication Chart, lubricate all joints.
Check steering and toe-in. Check tyre pressures. Check that wheel nuts are firmly
attached.
Test electrical system. Check fault memory. Check battery charge status. Check the
function and settings of the lighting and signalling system.
Fill up with diesel, use pre-filter if necessary.
Check that brakes are working effectively.
Information to be given on vehicle delivery
Draw attention to safety instructions within the Operating Manual and on the vehicle
itself.
Information on keeping to countryu-specific regulations regarding vehicle speed and
trailer braking systems.
Explain the following features in detail - see index - and show how they are operated.
See also separate vehicle delivery test log.
Operating controls, transmission, multiple display, initial start-up, starting, and switching off,
fault display, code table, clearing the warning and fault messages.
Explain "Important Information on Service and Maintenance". See inside back cover.
Hand over tool box accessories.
Fill in warranty and delivery card and forward immediately to the factory.
For 50 km/h version, draw attention to the required regular vehicle inspections
(country-specific).
Vehicle type .............................
Chassis No. ............................. After-Sales Service
Vehicle delivered on . . . . . . . . . . . . . . .
Signature of mechanic . . . . . . . . . . . . . . . . .