FENDT 916 Vario, Operating Manual

Page: 161 / 267

161
CARE AND MAINTENANCE
20.5 Adjusting the auxiliary
headlampss
Operation_Pic_number:1
At a 10 metre distance the upper limit of the
illuminated area is two thirds of the height of the
tractor lights.
20.6 Auxiliary lights, Xenon
headlights
Text-module
Xenon headlights
Operation_Pic_number:1
Text-module
To be remembered when operating the head-
lamps.
●
Headlamps develop a lot of heat. Fire hazard.
●
Do not look directly into the light.
●
Clean the glass from time to time, but only
when they are cold.
●
Do not clean the glass with fluid when the
lamps are on. Danger of shattering!
DANGER:
Always pull out connector (A/ CARE
AND MAINTENANCE Fig. 65) when
carrying out maintenance and repair
work.
Fig.64
Fig.65
●
Do not use aggressive or abrasive cleaning
agents.
●
Do not operate on public roads.
Text-module
To be remembered when replacing the bulb.
●
Always turn off the headlamps and discon-
nect the supply voltage before changing the
bulb.
●
Do not reach into the bulb socket.
●
The connection between headlamp and con-
nection unit carries high voltage. Do not dis-
connect!
●
Do not operate transformer unit without a
bulb. Flashovers at the bulb socket can cause
damage.
●
Allow bulb to cool.
●
When changing the bulb, wear safety glasses
and gloves.
●
The glass body of the bulb is under pressure.
Danger of splitters!
●
Only touch bulb at the base.
●
Remove dirt from the glass with alcohol and a
clean cloth.
●
Only use the bulb in a sealed headlamp.
●
If the bulb breaks in a closed room, the room
must be cleared of people and aired for at le-
ast 20 minutes to avoid health hazards due to
the gases.
●
Dispose of faulty bulbs as special waste.