FAZUA RIDE 50 TRAIL/STREET, Assembly Instructions Manual

Page: 7 / 32

Assembly instructions | English
7
Useful additional information is marked with this information symbol.
You can find out which tools you need for each step in the process at 1.2 “Fastening elements
and tools” on page 5.
Next to the torque spanner symbol, you will find information on the torque with which the
screws must be tightened for the respective work step.
3 GENERAL SAFETY INSTRUCTIONS
WArninG
There is a risk of accident and injury if the safety instructions are not observed!
If you do not observe the general safety instructions listed here, you can injure yourself and the
drive system or individual components can be damaged. Improperly mounted or damaged compo-
nents pose significant risks of accident and injury to the user of the e-bike.
►
Never open any components of the drive system. The components of the FAZUA RIDE 50 drive
system may only be opened by FAZUA GmbH employees. Unauthorised opening will invalidate the
warranty claim and there is a risk of irreparable damage to the drive system.
►
CAUTION! When fully assembling the drive system, the cable for the rear brake and the rear derail-
leur must always be laid first. Subsequently, the assembly of the drive system can be started.
Follow the sequence below when installing the components:
1. REMOTE (control unit)
2. LOCKER
3. Speed sensor
4. BOTTOM BRACKET
5. DRIVEPACK
►
Only remove the BOTTOM BRACKET as instructed by the FAZUA Service Hotline.
►
When replacing components mounted on the BOTTOM BRACKET and all other components of the
e-bike (e.g. chainring, pedals), only components of identical design or approved by the bicycle
manufacturer may be mounted.
►
Clean and degrease all threads before screwing.
►
Allow the threadlocker to cure for at least 6 hours after assembly.
►
Follow the instructions for the individual steps to avoid assembly errors and damage to the
components.