FAZUA RIDE 50 TRAIL/STREET, Assembly Instructions Manual

Page: 10 / 32

English | Assembly instructions
10
Step 3: Connecting REMOTE FX to the BOTTOM BRACKET
→
If necessary, reinstall the LOCKER and the BOTTOM BRACKET if you have previously removed the parts to
route the REMOTE cable through the frame.
Grease the sealing ring of the connectors (highlighted in colour) with a little silicone grease
before inserting it into the connector to make it easier to insert. Make sure to grease only
the sealing ring and not the entire plug.
Note the arrow mark on the plug and
the notch on the connector to insert
the plug into the slot correctly aligned.
→
Insert the REMOTE connector (2) into the centre
connector on the BOTTOM BRACKET using the
needle-nose pliers.
The green marked left connection (in driving
direction) is intended for the green marked plug
of the speed sensor
(3) .
3
2
If no other accessories are fitted to
the e-bike, the right-hand connec-
tion on the BOTTOM BRACKET remains
unoccupied.
→
Make sure that the connection (4) ,
which may be free, is closed with a
cap for the BOTTOM BRACKET.
4
Step 4: Checking REMOTE functions with FAZUA Toolbox
→
Finally, carry out a diagnosis with the FAZUA toolbox and check that all functions are working correctly.