FAZUA RIDE 50 TRAIL/STREET, Assembly Instructions Manual

Page: 27 / 32

Assembly instructions | English
27
Step 2: Disconnecting the cable from the BOTTOM BRACKET box
→
Using the needle-nose pliers, carefully pull all the
plugs out of their connections on the BOTTOM
BRACKET in a straight motion.
Step 3: Loosening the fastening of the BOTTOM BRACKET
→
Use the Torx screwdriver T30 to loosen the four
gear screws (RIDE 50 Screw BB Mount)
(14) .
14
Step 4: Remove the BOTTOM BRACKET from the frame
The BOTTOM BRACKET is usually very
tight in the mount, you may have to
jiggle it carefully to get it out of the
mount.
→
Remove the BOTTOM BRACKET by hand from its
seat on the frame.
Be careful not to crush or bend any cables.